Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: insertion pinDescription: Weidmuller 3.50 mm The Omnimate series 180 ° flange covered pipe socket is designed for wave (flow) welding. The welding pin length of the Weidmuller 3.50 mm pitch Omnimate series 180 ° flange covered socket is 3.2 mm, suitable for printed circuit boards with thicknesses of 1.6 mm and 2.0 mm. ###Please refer to inventory number 762-6044 (typical) for the corresponding 180 ° flange Omnimate connector. For the corresponding 90 ° flange Omnimate connector, please refer to stock number 762-6179 (typical). ###3.5mm Pitch # # # 3.5mm Pitch - Weidmuller Omnimate Series The 3.50mm pitch Weidmuller Omnimate series provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal tube sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16076961+$36.750110+$34.6415100+$33.0751250+$32.8341500+$32.59311000+$32.32202500+$32.08105000+$31.9304 -
![]()
Category: insertion pinDescription: SC Tube sockets -90 ° 3.2mm pin length These 90 ° Weidmuller SC series through-hole covered tube sockets have a soldering pin length of 3.2mm, suitable for wave soldering. ###Please refer to inventory number 739-3857 for 180 ° and 739-3920 (typical) for 90 ° for matching 3.81 mm pitch BCZ plug and socket connectors. ### 3.81mm Pitch - Weidmuller Omnimate Range725810+$7.1928100+$6.8332500+$6.59341000+$6.58142000+$6.53355000+$6.47357500+$6.425610000+$6.4016 -
![]()
Category: insertion pinDescription: SC Flange socket -90 ° 3.2mm pin length These 90 ° Weidmuller SC series through holes, flange sockets have a welding pin length of 3.2mm, suitable for wave welding. ###Please refer to inventory numbers 739-3873 for 180 ° and 739-3946 for 90 ° (typical) for matching 3.81 mm pitch BCZ flange plug socket connectors. ### 3.81mm Pitch - Weidmuller Omnimate Range976310+$7.7940100+$7.4043500+$7.14451000+$7.13152000+$7.07965000+$7.01467500+$6.962610000+$6.9367 -
![]()
Category: insertion pinDescription: SC Flange socket -90 ° 3.2mm pin length These 90 ° Weidmuller SC series through holes, flange sockets have a welding pin length of 3.2mm, suitable for wave welding. ###Please refer to inventory numbers 739-3873 for 180 ° and 739-3946 for 90 ° (typical) for matching 3.81 mm pitch BCZ flange plug socket connectors. ### 3.81mm Pitch - Weidmuller Omnimate Range45065+$19.526150+$18.6917200+$18.2244500+$18.10761000+$17.99072500+$17.85725000+$17.77387500+$17.6903 -
![]()
Category: insertion pinDescription: SC Flanged Headers - 180° 3.2mm Pin Length These Weidmuller SC series of 180°, Through Hole, Flanged Headers have 3.2 mm solder pin lengths suitable for Wave soldering. ### note For mating 3.81 mm pitch BCZ flanged plug Socket Connectors see stock number 739-3873 for 180 ° and 739-3946 for 90° typical. ### 3.81mm Pitch - Weidmuller Omnimate Range56435+$19.572950+$18.7365200+$18.2681500+$18.15101000+$18.03392500+$17.90005000+$17.81647500+$17.7327 -
![]()
Category: insertion pinDescription: SC Flanged Headers - 180° 3.2mm Pin Length These Weidmuller SC series of 180°, Through Hole, Flanged Headers have 3.2 mm solder pin lengths suitable for Wave soldering. ### note For mating 3.81 mm pitch BCZ flanged plug Socket Connectors see stock number 739-3873 for 180 ° and 739-3946 for 90° typical. ### 3.81mm Pitch - Weidmuller Omnimate Range956110+$10.5972100+$10.0673500+$9.71411000+$9.69642000+$9.62585000+$9.53757500+$9.466810000+$9.4315 -
![]()
Category: insertion pinDescription: Weidmuller 3.50 mm The Omnimate series 180 ° flange covered pipe socket is designed for wave (flow) welding. The welding pin length of the Weidmuller 3.50 mm pitch Omnimate series 180 ° flange covered socket is 3.2 mm, suitable for printed circuit boards with thicknesses of 1.6 mm and 2.0 mm. ###Please refer to inventory number 762-6044 (typical) for the corresponding 180 ° flange Omnimate connector. For the corresponding 90 ° flange Omnimate connector, please refer to stock number 762-6179 (typical). ###3.5mm Pitch # # # 3.5mm Pitch - Weidmuller Omnimate Series The 3.50mm pitch Weidmuller Omnimate series provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal tube sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16053125+$13.377850+$12.8061200+$12.4859500+$12.40591000+$12.32592500+$12.23445000+$12.17727500+$12.1200 -
![]()
Category: insertion pinDescription: 2 The Weidmuller B2L/S2L is a two-piece printed circuit board connector without screws, providing standard 3.5mm pitch dual density. Compared to connectors with a pitch of 2.5mm or 2.54mm, it saves 30% of space without the need for specialized tools. Compared to connectors with a pitch of 2.5 and 2.54mm, it is easier to manipulate and provides the highest wiring density, suitable for single wire # # # 3.5mm pitch # # 3.5mm pitch - The Weidmuller Omnimate series with a pitch of 3.50mm provides an economical and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal sockets, and can be directly soldered to the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16021105+$26.395250+$25.2672200+$24.6355500+$24.47761000+$24.31972500+$24.13925000+$24.02647500+$23.9136 -
![]()
Category: insertion pinDescription: 8A / 250Vac Suitable for 0.5-1.5mm ² specification wires # # # accredited UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10017045+$28.652150+$27.4277200+$26.7420500+$26.57061000+$26.39912500+$26.20325000+$26.08087500+$25.9583 -
![]()
Category: insertion pinDescription: 3.5mm Pitch # # # 3.5mm Pitch - The Weidmuller Omnimate series with a pitch of 3.50mm provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16012915+$20.126350+$19.2662200+$18.7846500+$18.66421000+$18.54382500+$18.40615000+$18.32017500+$18.2341 -
![]()
Category: insertion pinDescription: 3.5mm Pitch # # # 3.5mm Pitch - The Weidmuller Omnimate series with a pitch of 3.50mm provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16032245+$23.414050+$22.4134200+$21.8531500+$21.71301000+$21.57292500+$21.41285000+$21.31287500+$21.2127 -
![]()
Category: insertion pinDescription: Horizontal Closed Ends Thro Hole Headers 3.2mm Pin Length These SL 5.08mm pitch Omnimate headers have a 3.2mm pin length for optimised Wave soldering. ### note For mating cable mount terminals see typical stock numbers 733-0777 for Screw type or 733-0828 for Rising Clamp type or 733-0878 for Tension Clamp Screwless type. ### 5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10067315+$15.664050+$14.9946200+$14.6197500+$14.52601000+$14.43232500+$14.32525000+$14.25827500+$14.1913 -
![]()
Category: insertion pinDescription: SL-SMT The series 5.08mm pitch Omnimate needle holder has a 3.2mm pin length and high-temperature body material, making it suitable for wave soldering or reflow soldering. This allows these through-hole reflow (THR) connectors to be used on appropriately designed circuit boards using surface mount technology (SMT). ###Please refer to typical inventory number 733-0777 for screw types, 733-0828 for high body clip types, or 733-0878 for tension clip without screw types regarding cable installation terminals. ###5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring rising clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10086631+$46.129410+$43.4827100+$41.5165250+$41.2140500+$40.91151000+$40.57122500+$40.26875000+$40.0797 -
![]()
Category: insertion pinDescription: 8A / 250Vac ### Recognized UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 100426810+$7.6476100+$7.2652500+$7.01031000+$6.99762000+$6.94665000+$6.88287500+$6.831910000+$6.8064 -
![]()
Category: insertion pinDescription: Horizontal closed end, printed circuit board needle holder. The layout and size of the printed circuit board are the same as the open end version, but with a closed end to prevent mismatches. (Overall shell, 2mm thicker than the open end shell). ###Recognized UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10023835+$24.283450+$23.2456200+$22.6645500+$22.51921000+$22.37392500+$22.20795000+$22.10417500+$22.0003 -
![]()
Category: insertion pinDescription: Closed end vertical printed circuit board pin socket connector rated voltage 8A/250Vac # # # recognized UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 100912610+$9.8016100+$9.3115500+$8.98481000+$8.96852000+$8.90315000+$8.82147500+$8.756110000+$8.7234 -
![]()
Category: insertion pinDescription: Vertical Closed Ends Thro Hole Headers 3.2mm Pin Length These SL 5.08mm pitch Omnimate headers have a 3.2mm pin length for optimised Wave soldering. ### note For mating cable mount terminals see typical stock numbers 733-0777 for Screw type or 733-0828 for Rising Clamp type or 733-0878 for Tension Clamp Screwless type. ### 5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10015555+$15.125850+$14.4794200+$14.1174500+$14.02691000+$13.93642500+$13.83305000+$13.76837500+$13.7037 -
![]()
Category: insertion pinDescription: Horizontal closed end, printed circuit board needle holder. The layout and size of the printed circuit board are the same as the open end version, but with a closed end to prevent mismatches. (Overall shell, 2mm thicker than the open end shell). ###Recognized UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10072945+$6.297825+$5.831350+$5.5047100+$5.3648500+$5.27152500+$5.15485000+$5.108210000+$5.0382 -
![]()
Category: insertion pinDescription: 3.5mm Pitch # # # 3.5mm Pitch - The Weidmuller Omnimate series with a pitch of 3.50mm provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16074425+$18.136250+$17.3611200+$16.9271500+$16.81861000+$16.71012500+$16.58615000+$16.50867500+$16.4311 -
![]()
Category: insertion pinDescription: SC-SMT Headers - 90° 1.5mm Pin Length These Weidmuller SC-SMT series of 90°, Through Hole Shrouded Headers have 1.5 mm solder pin lengths suitable for Through Hole Reflow (THR) soldering. ### note For mating 3.81 mm pitch BCZ plug Socket Connectors see stock number 739-3857 for 180 ° and 739-3920 for 90° typical. ### 3.81mm Pitch - Weidmuller Omnimate Range85855+$14.358250+$13.7446200+$13.4010500+$13.31511000+$13.22922500+$13.13105000+$13.06977500+$13.0083 -
![]()
Category: insertion pinDescription: SC-SMT Flanged Headers - 90° 1.5mm Pin Length These Weidmuller SC-SMT series of 90°, Through Hole Flanged Headers have 1.5 mm solder pin lengths suitable for Through Hole Reflow (THR) soldering. The design of these SC-SMT LF series headers incorporates extra solder pins for increased strength between the PCB and header. ### note For mating 3.81 mm pitch BCZ flanged plug Socket Connectors see stock number 739-3873 for 180 ° and 739-3946 for 90° typical. ### 3.81mm Pitch - Weidmuller Omnimate Range70975+$15.614850+$14.9475200+$14.5738500+$14.48041000+$14.38702500+$14.28025000+$14.21357500+$14.1468 -
![]()
Category: insertion pinDescription: Weidmuller 3.50 mm The Omnimate series 180 ° flange covered pipe socket is designed for wave (flow) welding. The welding pin length of the Weidmuller 3.50 mm pitch Omnimate series 180 ° flange covered socket is 3.2 mm, suitable for printed circuit boards with thicknesses of 1.6 mm and 2.0 mm. ###Please refer to inventory number 762-6044 (typical) for the corresponding 180 ° flange Omnimate connector. For the corresponding 90 ° flange Omnimate connector, please refer to stock number 762-6179 (typical). ###3.5mm Pitch # # # 3.5mm Pitch - Weidmuller Omnimate Series The 3.50mm pitch Weidmuller Omnimate series provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal tube sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 160505510+$9.9708100+$9.4723500+$9.13991000+$9.12332000+$9.05685000+$8.97377500+$8.907210000+$8.8740 -
![]()
Category: insertion pinDescription: Vertical Open Ends Thro Hole Headers 3.2mm Pin Length These SL 5.08mm pitch Omnimate headers have a 3.2mm pin length for optimised Wave soldering. ### note For mating cable mount terminals see typical stock numbers 733-0777 for Screw type or 733-0828 for Rising Clamp type or 733-0878 for Tension Clamp Screwless type. ### 5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10035905+$29.324950+$28.0717200+$27.3699500+$27.19441000+$27.01902500+$26.81855000+$26.69327500+$26.5678 -
![]()
Category: insertion pinDescription: Vertical Closed Ends Thro Hole Headers 3.2mm Pin Length These SL 5.08mm pitch Omnimate headers have a 3.2mm pin length for optimised Wave soldering. ### note For mating cable mount terminals see typical stock numbers 733-0777 for Screw type or 733-0828 for Rising Clamp type or 733-0878 for Tension Clamp Screwless type. ### 5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10023671+$46.645510+$43.9691100+$41.9809250+$41.6751500+$41.36921000+$41.02512500+$40.71925000+$40.5280 -
![]()
Category: insertion pinDescription: SL-SMT The series 5.08mm pitch Omnimate needle holder has a 3.2mm pin length and high-temperature body material, making it suitable for wave soldering or reflow soldering. This allows these through-hole reflow (THR) connectors to be used on appropriately designed circuit boards using surface mount technology (SMT). ###Please refer to typical inventory number 733-0777 for screw types, 733-0828 for high body clip types, or 733-0878 for tension clip without screw types regarding cable installation terminals. ###5.08mm Pitch - Weidmuller # # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring rising clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10061375+$4.488825+$4.156350+$3.9235100+$3.8238500+$3.75732500+$3.67415000+$3.640910000+$3.5910 -
![]()
Category: insertion pinDescription: SC-SMT Headers - 180° 3.2mm Pin Length These Weidmuller SC-SMT series of 180°, Through Hole Shrouded Headers have 3.2 mm solder pin lengths suitable for either Through Hole Reflow (THR) soldering or Wave soldering. ### note For mating 3.81 mm pitch BCZ plug Socket Connectors see stock number 739-3857 for 180 ° and 739-3920 for 90° typical. ### 3.81mm Pitch - Weidmuller Omnimate Range41455+$13.803750+$13.2138200+$12.8834500+$12.80081000+$12.71822500+$12.62395000+$12.56497500+$12.5059 -
![]()
Category: insertion pinDescription: 8A / 250Vac ### Recognized UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10089355+$14.160550+$13.5554200+$13.2165500+$13.13181000+$13.04702500+$12.95025000+$12.88977500+$12.8292 -
![]()
Category: insertion pinDescription: SC Tube sockets -180 ° 3.2mm pin length These 180 ° Weidmuller SC series through-hole covered tube sockets have a soldering pin length of 3.2mm, suitable for wave soldering. ###Please refer to inventory number 739-3857 for 180 ° and 739-3920 (typical) for 90 ° for matching 3.81 mm pitch BCZ plug and socket connectors. ### 3.81mm Pitch - Weidmuller Omnimate Range679010+$7.6320100+$7.2504500+$6.99601000+$6.98332000+$6.93245000+$6.86887500+$6.817910000+$6.7925 -
![]()
Category: insertion pinDescription: 3.5mm Pitch # # # 3.5mm Pitch - The Weidmuller Omnimate series with a pitch of 3.50mm provides an affordable and space saving solution for printed circuit boards, suitable for applications with vertical or horizontal sockets that can be directly soldered onto the board. Matching wire harness connectors with fully closed tube sockets on both sides of tension clamps or rising clamp screw terminals can prevent mismatched connections. Flame retardant rating UL94 V-0 1, 2, 3, 4 type wire specifications (AWG) | 16-28--- | --- wire specification type 5 (mm ²) | 0.08-1.0 contact material | tinned brass 1, 2, 3, 4 type insulators | PBT insulator type 5 | PA flammability rating | UL94V-0 1, 2, 3, 4 type rated current (A) | 85 type rated current (A) | 7.5 1, 2, 3, 4 type rated voltage (V) | 300 5 type rated voltage (V) | 16050735+$32.441850+$31.0554200+$30.2790500+$30.08491000+$29.89082500+$29.66905000+$29.53037500+$29.3917 -
![]()
Category: insertion pinDescription: 8A / 250Vac Suitable for 0.5-1.5mm ² specification wires # # # accredited UL (E 60693); CSA (12400) # # # 5.08mm Pitch - Weidmuller # # 5.08mm Pitch - Weidmuller Omnimate Series Weidmuller Omnimate Series 5.08mm Pitch Two Part Connector, allowing wire to board connections through terminal blocks, using spring and spring up clamp screw technology or tension clamp and push in screw free technology. Weidmuller 8-way clamp up terminal block is suitable for a wide range of printed circuit board designs and connector applications. The printed circuit board hole has a 1.3mm diameter screw clamp type that accepts up to 1.5mm ² wire tension clamps and an IDC (screw free) option that allows for quick assembly time molding of male straight needle sockets (open or closed end) 90 ° printed circuit board pins or 135 ° needle socket polarized pins to prevent mismatched connections. Rated voltage | 250V AC --- Temperature rated value | Length of stripped insulator from -20 to+100 ° C | 6mm printed circuit board pitch | 5.08mm PCB pinhole diameter | 1.3+± 0.1mm lifespan (cycle) | ≥ 10035295+$18.255550+$17.4754200+$17.0385500+$16.92931000+$16.82002500+$16.69525000+$16.61727500+$16.5392
